NCB-3220/NOC3220 Changelog

Release Date October 31, 2006

New Features

• Modify BAND & Rate can select with CB mode.
• Added B mode Output power control.
• Modify kernel support Excel flash ES29LV320DB 、 ES29LV160DB & spansion flash S29JL064H.
• Boot code:
• - Support Excel flash ES29LV320DB、ES29LV160DB & spansion flash S29JL064H(4M)

Problems Resolved

• Update WPA daemon(auth) to version v1.7b for the following changes:
• - Add security log.
• - Reset new allocated memory to fix the connection unstable problem when for 2nd or later STA to associate with AP.
• - Fix a memory leak issue when WPA authentication was failed.
• Update wlan driver to version v1.11 for the following changes:
• - Add support for external LNA.
• - Add log for ACL.
• - Find tune rate adaptive mechanism.
• - Fix bug of G-only client mode to associate to BG AP.
• - Fix AP+WDS encryption problem. When AP is set to WPA or WPA2, WDS channel may not work if WDS security is enabled.
• Modify init.sh remove Setup WAN interface.

Changed

• Change AP mode wlan led type = 7 (Enable/tx/rx), CB mode = 5 (link/tx/rx) .
• Edit SNMP webpage "Support WebAdmin Control" to "SNMP Daemon:" .
• When reload seting to device show 18 Sec to count down.
• Modify reboot webpage show 50 Sec to count down.
• If setting to AdHoc mode remove Transparent bridge funtion.
• Modify use SNMP get current auto TX rate issue.
• Modify CB mode on webpage show signal level and noise level of current AP.
• Boot code:
• - Modify SDRAM clock for stability.

Release Date July 20 , 2006

New Features

• Add nuttcp appilication default with server mode.

Problems Resolved

• Modify bridge mode security web page remove 802.1x funtion.When AP mode change to CB mode, USE1X=0 WPA_AUTH=2
• Remove Turbo mode funtion, when use turbo mode, b mode Throughput will be down to 2-3 MB.
• Debug WLAN dhcp clinet can't work with bridge router mode.
• Remove WLAN clone MAC with bridge router mode.
• Add Clinet Route mode lan side show gateway(can use DHCP server get gateway ip).

Changed

• change AP mode wlan led type = 6(enable), CB mode = 2(link).

Release Date June 27 , 2006

Problems Resolved

• Remove init.sh kill reload (HW reset) funtion.

Release Date April 13 , 2006

New Features

• Add User Isolation funtion.

Problems Resolved

• When device reload driver kill reload process.
• Remove clinet router mode LAN default gateway.

Changed

• Edit chage mode pop up windows message "Please change the IP Address in your web browser to (XXX.XXX.XXX.XXX)".
• Edit Upgrade firmware message to "Update successful (size = x bytes) Please wait while the device is rebooting.".

Release Date March 29, 2006

New Features

• Add wlan “turbo” mode. When it is enabled, it will burst packet to get better performance when 3220 AP via Realtek wlan clients (i.e., 8185 PCI, 8187 USB or 8186 client).
• Web page add restart column.
• Add an option to save system log file to remote PC.

Problems Resolved

• Fix an auto-channel issue that AP may not be able to detect other APs which broadcast SSID is disabled.
• Fix aWPA/WPA2 mixed mode issue in 802.1x daemon (auth) under AP mode.
• Fix a 802.1x daemon problem that 3220 client may not be able to connect to an AP in WPA2 TKIP.
• Fix bug of connection fail in Ad-hoc mode if hidden AP function is turned on.
• Fix a wlan hang up problem when auto channel selection is used under AP+WDS mode.
• Fix the problem that spanning tree protocol packet can’t pass-through through Ethernet-wlan bridge in client mode.
• Fix a compatibility issue when 3220 client is set to B band only.
• Fix bug of client router can't work.

Changed

• Modify the way of setting wlan mib from script file to binary data at one time (by flash utility) to reduce configuration time.
• Modify web server to response user update after configuration data has been updated into flash. It will not wait until the system is re-initialized.
• Replace 'reload.sh' script file with a daemon program (reload) to fix the performance degrade issue.
• Add Tx priority queue in wlan driver for Ethernet LAN priority packet. This option is disabled in default.
• Speedup roaming time when 3220 is configured as infrastructure client.
• Improve wlan rate adaptive mechanism.
• Reduce allocated memory for 802.1x daemon.
• Modify web server to allow user update f/w, including web-page+Linux+config-data.
• Use LZMA compression algorithm to compress Linux image to get better compression ratio.
• When fix rate selection is used b rate, can't select power.
• Date rate showed the different option with power level.

Release Date March. 17, 2006

New Features

• Add Client router mode.
• Add transparent bridge daemon.(when transparent bridge enable, client bridge can't ping other client bridge)
• In client mode,add desired bssid column.
• In client router mode,delete "Enable Mac Clone" option.
• Add SNMP web page.

Release Date March. 1, 2006

New Features

• Add SNMP daemon.(always on) and Senao Private MIB

Changed

• Remove telnet Daeomon. (Since Telnet daemon which don`t support Authentication, so PM decide to remove it from v1.33)
• Remove Auto-Config daemon to reduce the size of Ramdisk.img.

Release Date January. 20, 2006

Changed

• Regulatory Domain differentiation in manufacturing mode.
• Remove Wlan interface Disable item on Web Page.
• Take off B/G mode selection function in Client-Bridge mode.

Release Date December. 28, 2005

Changed

• Disable High Power Check(iwpriv wlan0 set_mib HighPowerChk=0).
• Add Gateway and DNS Relay in AP mode.

Release Date December. 4, 2005

New Features

• Add Tx Power Control.